Motorola Solutions WiNG 5.2.6 Reference Manual page 38

3 - 12 WiNG 5.2.6 Access Point System Reference Guide
16.Set the following parameters for each radio:
• Configure as a Date Radio - Select this option to dedicate this radio for WLAN client support in either the
selected 2.4 or 5GHz radio band.
• Radio Frequency Band - Select either the 2.4GHz or 5.0GHz radio band to use with the radio when selected
as a Data Radio. The selected band is used for WLAN client support. Considers selecting one radio for
2.4GHz and another for 5GHz support (if using a dual or three radio model) when supporting clients in both
the 802.11bg and 802.11n bands.
• Power Level - Use the spinner control to select a 1 - 23 dBm minimum power level to assign to this radio in
selected 2.4 or 5.0 GHz band. 1 dBm is the default setting.
• Channel Mode - Select either Random, Best or Static. Select
comply with Dynamic Frequency Selection (DFS) requirements in the European Union, the 802.11a/n radio
uses a randomly selected channel each time the access point is powered on. Select
cess point to scan non-overlapping channels and listen for beacons from other access points. After the
Figure 3-10 Initial AP Setup Wizard - Radio Configuration
Random for use with a 802.11a/n radio. To
Best to enable the ac-