Motorola Solutions WiNG 5.2.6 Reference Manual page 252

5 - 194 WiNG 5.2.6 Access Point System Reference Guide
users to know about certificates and PKI. However, administrators do not need to define security parameters for
access points to be adopted (secure WISPe being an exception, but that isn't a commonly used feature). Also, users
can replace any device on the network or move devices around and they continue to work. Default security parameters
for MiNT are such that these scenarios continue to function as expected, with minimal user intervention required only
when a new network is deployed.
The profile database on the RADIUS server consists of user profiles for each connected network access server (NAS)
port. Each profile is matched to a username representing a physical port. When users are authorized, it queries the
user profile database using a username representative of the physical NAS port making the connection.
To set or override an advanced configuration:
1. Select Devices
2. Select a target device from the Device Browser in the lower, left-hand, side of the UI.
3. Select Profile Overrides
4. Select Advanced
5. Select MINT Protocol
The MINT Protocol screen displays the
6. Refer to the
configuration.
Level 1 Area ID
from the Configuration menu.
to expand its menu items
to expand its sub menu items.
if it does not display by default.
Settings
Figure 5-105 Advanced Profile Overrides MINT screen - Settings tab
Area Identifier field to define or override the Level 1 and Level 2 Area IDs used by the profile's MINT
Select the box to enable a spinner control for setting the Level 1 Area ID
between 1 - 4,294,967,295. The default value is disabled.
tab by default.