Motorola Solutions WiNG 5.2.6 Reference Manual page 329

Maximum Wireless
Clients
Maximum Roamed
Wireless Clients
Reserved for Roam
13.Set the following Normal (Best Effort) Access
Enable Best Effort
Maximum Airtime
Maximum Wireless
Clients
Maximum Roamed
Wireless Clients
Reserved for Roam
Set the number of voice supported wireless clients allowed to exist (and
consume bandwidth) within the radio's QoS policy. Select from an
available range of 0-256 clients. Consider setting this value proportionally
to the number of other QoS policies supporting the voice access category,
as wireless clients supporting voice use a greater proportion of resources
than lower bandwidth traffic (like low and best effort categories).
Set the number of voice supported wireless clients allowed to roam to a
different access point radio. Select from a range of 0-256 clients. The
default value is 10 roamed clients.
Set the roam utilization (in the form of a percentage of the radio's
bandwidth) allotted to admission control for voice supported clients who
have roamed to a different access point radio. The available percentage
range is from 0-150%, with 150% available to account for
over-subscription. The default value is 10.
admission control settings for the radio QoS policy
Select the check box to enable admission control for video traffic. Only
normal background traffic admission control is enabled, not any of the
other access categories (each access category must be separately enabled
and configured). This feature is disabled by default.
Set the maximum airtime (in the form of a percentage of the radio's
bandwidth) allotted to admission control for normal background client
traffic. The available percentage range is from 0-150%, with 150% being
available to account for over-subscription. This value helps ensure the
radio's bandwidth is available for lower bandwidth normal traffic (if
anticipated to proliferate the wireless medium). Normal background traffic
only needs a short radio airtime to process, so set an intermediate airtime
value if the radio QoS policy is reserved for background data support. The
default value is 75.
Set the number of wireless clients supporting background traffic allowed
to exist (and consume bandwidth) within the radio's QoS policy. Select
from an available range of 0-256 clients. The default value is 100 clients.
Set the number of normal background supported wireless clients allowed
to roam to a different managed access point radio. Select from a range of
0-256 clients. The default value is 10 roamed clients.
Set the roam utilization (in the form of a percentage of the radio's
bandwidth) allotted to admission control for normal background supported
clients who have roamed to a different managed radio. The available
percentage range is from 0-150%, with 150% available to account for
over-subscription. The default value is 10%.
Wireless Configuration 6 - 67