Motorola Solutions WiNG 5.2.6 Reference Manual page 31

6. Select Save/Commit within each page to save the updates made to that page's configuration. Select
to the next page listed in the Navigation Panel. Select
without saving your updates.
NOTE: While you can navigate to any page in the navigation panel, you cannot complete
the Initial AP Setup Wizard until each task in the Navigation Panel has a green
checkmark.
7. Select Next. The Initial AP Setup Wizard displays the
Standalone versus Virtual Controller AP functionality and the way the access point is adopted to a controller.
Figure 3-4 Initial Setup Wizard - Introduction
Back
Access Point Type
to revert to the previous screen in the Navigation Panel
screen to define the access point's
Quick Start 3 - 5
Next to proceed