Motorola Solutions WiNG 5.2.6 Reference Manual page 427

6. Select the Add button to add a new RADIUS user,
remove an existing user Id.
7. Set the following to create a new RADIUS user with unique access privileges:
User Id
Password
Guest User
Group List
8. Select OK to save the user group membership configuration. Select
Edit to modify the configuration of an existing user or
Figure 8-19 RADIUS User screen
Assign a unique alphanumeric string identifying this user. The ID cannot
exceed 64 characters.
Provide a password unique to this user. The password cannot exceed 32
characters. Select the Show checkbox to expose the password's actual
character string. Leaving the option unselected displays the password as a
string of asterisks (*).
Select the checkbox to designate this user as a guest with temporary access.
The guest user must be assigned unique access times to restrict their access.
If the user has been defined as a guest, use the Group drop-down menu to
assign the user a group with temporary access privileges. If the user is defined
as a permanent user, select a group from the group list. If there's no groups
listed relevant to the user's intended access, select the Create icon and create
a new group configuration suitable for the user membership. For more
information, see Creating RADIUS Groups on page
Services Configuration 8 - 35
8-31.
Reset to revert to the last saved configuration.
Delete to