Motorola Solutions WiNG 5.2.6 Reference Manual page 256

5 - 198 WiNG 5.2.6 Access Point System Reference Guide
13. Select the
configuration.
The VLAN tab displays the VLAN, Routing Level, Link Cost, Hello Packet Interval and Adjacency Hold Time
managed devices use to securely communicate amongst one another.
19.Select Add
VLAN tab to display the link IP VLAN information shared by the access points managed by the MINT
Figure 5-108 Advanced Profile MINT screen - VLAN tab
to create a new VLAN link configuration or
NOTE: If creating a mesh link between two access points in Standalone AP mode, you'll
need to ensure a VLAN is available to provide the necessary MINT link between the two
Standalone APs.
Edit to override an existing MINT configuration.