Motorola Solutions WiNG 5.2.6 Reference Manual page 128

5 - 70 WiNG 5.2.6 Access Point System Reference Guide
17. Refer to the following to determine whether a new Dynamic NAT configuration requires creation, edit or deletion:
Source List ACL
Network
Interface
Overload Type
NAT Pool
Overload IP
18. Select Add
permanently remove a configuration.
Figure 5-38 Dynamic NAT screen
Lists the ACL defining packet selection criteria for the NAT configuration.
NAT is applied only on packets which match a rule defined in the
access-list. These addresses (once translated) are not exposed to the
outside world when the translation address is used to interact with the
remote destination.
Displays Inside or Outside NAT as the network direction for the dynamic
NAT configuration.
Lists the VLAN (between 1 - 4094) used as the communication medium
between the source and destination points within the NAT configuration.
Lists the Overload Type used with the listed IP ACL rule. Options include
NAT Pool, One Global Address and Interface IP Address. Interface IP
Address is the default setting.
Displays the name of an existing NAT pool used with the dynamic NAT
configuration.
Enables the use of one global address for numerous local addresses.
to create a new Dynamic NAT configuration, Edit to modify an existing configuration or Delete to