Motorola Solutions WiNG 5.2.6 Reference Manual page 52

4 - 6 WiNG 5.2.6 Access Point System Reference Guide
4.1.1.1.4 Client RF Quality Index

Dashboard Conventions
The Client RF Quality field displays a list of the worst 5 performing clients managed by the selected access point.
The Client RF Quality Index
Worst 5
Client MAC
Retry Rate
Periodically select
Figure 4-6 Client RF Quality Index
displays the following:
Lists the worst 5 performing client radios connected to the access point.
The RF Quality Index measures the overall effectiveness of the RF
environment as a percentage. Its a function of the connect rate in both
directions, as well as the retry rate and the error rate.
The quality is measured as:
• 0-20 – Very poor quality
• 20-40 – Poor quality
• 40-60 – Average quality
• 60-100 – Good quality
Displays the factory encoded MAC address assigned to each connected
radio listed. Use this information to assist in the identification of poorly
performing radios.
The Client MAC displays as a link that can be selected to display client
configuration and network address information in greater detail.
Lists the number of retries attempted to re-connect with the listed radio.
Refresh (at the bottom of the screen) to update client RF quality.