Wmm Tspec - Motorola Solutions WiNG 5.2.6 Reference Manual

R-Value
Refresh

12.4.4 WMM TSPEC


Wireless Client Statistics
802.11e Traffic Specification (TSPEC) provides a set of parameters that defines the characteristics of the traffic stream,
(operating requirement and scheduling etc.). The sender TSPEC specifies parameters available for the flow of packets.
Both the sender and the receiver use TSPEC.
The TSPEC screen provides the information about these TSPEC counts, TSPEC types, etc. of the wireless client selected.
To view the TSPEC statistics:
1. Select the Statistics
2. Select System
point, then a connected client.
3. Select WMM TPSEC.
R-value is a number or score that is used to quantitatively express the quality
of speech in communications systems. This is used in digital networks that
carry Voice over IP (VoIP) traffic. The R-value can range from 1 (worst) to 100
(best) and is based on the percentage of users who are satisfied with the
quality of a test voice signal after it has passed through a network from a
source (transmitter) to a destination (receiver). The R-value scoring method
accurately portrays the effects of packet loss and delays in digital networks
carrying voice signals.
Select the Refresh button to update the screen's statistics counters to their
latest values
menu from the Web UI.
from the navigation pane (on the left-hand side of the screen). Expand the RF Domain, select an access
Statistics 12 - 119