Motorola Solutions WiNG 5.2.6 Reference Manual page 413

10.Define the following General
Client Identifier
Type
Value
IP Address
Domain Name
Boot File
Figure 8-10 Static Bindings Add screen
parameters required to complete the creation of the static binding configuration:
Use the drop-down menu whether the DHCP client is using a Hardware
Address or Client Identifier as its identifier type with a DHCP server.
Provide a hardware address or client identifier value to help differentiate
the client from other client identifiers.
Set the IP address of the client using this host pool.
Provide a domain name of the current interface. Domain names aren't case
sensitive and can contain alphabetic or numeric letters or a hyphen. A fully
qualified domain name (FQDN) consists of a host name plus a domain
name. For example, computername.domain.com
Enter the name of the boot file used with this pool. Boot files (Boot
Protocol) can be used to boot remote systems over the network. BOOTP
messages are encapsulated inside UDP messages so requests and replies
can be forwarded. Each DHCP network pool can use a different file as
needed.
Services Configuration 8 - 21