Overriding A Services Configuration - Motorola Solutions WiNG 5.2.6 Reference Manual

13. Select OK to save the changes or overrides made to the dynamic NAT configuration. Select
saved configuration.

5.10.4 Overriding a Services Configuration

A profile can contain specific guest access (captive portal), DHCP server and RADIUS server configurations. These access,
IP assignment and user authorization resources can be defined uniquely as profile requirements dictate.
To define or override a profile's services configuration:
1. Select Devices
2. Select a target device from the Device Browser in the lower, left-hand, side of the UI.
3. Select Profile Overrides
4. Select Services.
5. Refer to the Captive Portal Hosting
this profile.
A captive portal is guest access policy for providing guests temporary and restrictive access to the network. The
primary means of securing such guest access is a hotspot.
A captive portal policy's hotspot configuration provides secure authenticated access using a standard Web browser.
Hotspots provides authenticated access by capturing and re-directing a user's Web browser session to a captive portal
from the Configuration tab.
from the Device menu to expand it into sub menu options.
NOTE: A blue override icon (to the left of a parameter) defines the parameter as having
an override applied. To remove an override, go to the Basic Configuration screen's Device
Overrides field and select Clear Overrides. This will remove all overrides from the device.
Figure 5-101 Profile Overrides - Services screen
field to set or override a guest access configuration (captive portal) for use with
Device Configuration 5 - 187
Reset to revert to the last