Motorola Solutions WiNG 5.2.6 Reference Manual page 468

11 - 6 WiNG 5.2.6 Access Point System Reference Guide
4. If needed, select
firmware. The number of additional fields that populate the screen is also dependent on the selected protocol.
5. Provide the following information to accurately define the location of the target device's firmware file:
Protocol
Port
IP Address
Hostname
Path/File
User Name
Password
6. Select OK
the upgrade popup. The upgrade continues in the background.
Advanced to expand the dialog to display network address information to the location of the
Figure 11-3 Advanced Firmware Upgrade screen
Select the protocol used for updating the firmware. Available options
include:
• tftp
• ftp
• sftp
• http
• cf
• usb1
• usb2
Use the spinner control or manually enter the value to define the port
used by the protocol for firmware updates. This option is not valid for cf,
usb1, and usb2.
Enter IP address of the server used to update the firmware. This option
is not valid for cf, usb1, and usb2.
Provide the hostname of the server used to update the firmware. This
option is not valid for cf, usb1, and usb2.
Specify the path to the firmware file. Enter the complete relative path
to the file on the server.
Define the user name used to access either a FTP or SFTP server.
This field is only available if the selected protocol is ftp or sftp.
Specify the user account password to access the FTP or a SFTP server.
This field is only available if the selected protocol is ftp or sftp.
to start the firmware update. Select Abort to terminate the firmware update. Select Close to close