Motorola Solutions WiNG 5.2.6 Reference Manual page 295

4. Define the following Client Settings
Enable
Client-to-Client
Communication
Wireless Client
Power
Wireless Client Idle
Time
Figure 6-12 WLAN Client Settings screen
for the WLAN:
Select this option to allow client to client communication within this WLAN.
The default is enabled, meaning clients are allowed to exchange packets with
other clients. Disabling this setting does not necessarily prevent clients on
other WLANs from sending packets to this WLAN, but as long as this setting
is disabled on the other WLAN, clients are not permitted to interoperate.
Use this parameter to set the maximum transmit power (between 0 - 20 dBm)
available to wireless clients for transmission. The default value is 20 dBm.
Set the maximum amount of time wireless clients are allowed to be idle within
this WLAN. Set the idle time in either Seconds (60 - 86,400), Minutes (1 -
1,440), Hours (0 - 24) or Days (0 - 1). When this setting is exceeded, the client
is no longer able to access resources and must re-authenticate. The default
value is 1,800 seconds.
Wireless Configuration 6 - 33