Motorola Solutions WiNG 5.2.6 Reference Manual page 339

9. Refer to the following information supporting configured RADIUS Accounting profiles.
Server ID
Host
Port
Server Type
Request Proxy Mode
Request Attempts
Request Timeout
DSCP
Displays the numerical server index (1-6) for the accounting server when
added to the list available to the access point.
Displays the IP address or hostname of the RADIUS authentication server.
Displays the port on which the RADIUS server listens to traffic within the
access point managed network. The port range is 1 to 65,535. The default
port is 1,813.
Displays the type of AAA server in use either Host, onboard-self, or
onboard-controller.
Lists the method of proxy that browsers communicate with the RADIUS
authentication server. The mode could either be None, Through Wireless
Controller, or Through RF Domain Manager.
Displays the number of attempts a client can retransmit a missed frame to
the RADIUS server before it times out of the authentication session. The
available range is between 1 and 10 attempts. The default is 3 attempts.
Displays the time between 1 and 60 seconds for the access point's
re-transmission of request packets. The default is 5 seconds. If this time is
exceeded, the authentication session is terminated.
Displays the DSCP value as a 6-bit parameter in the header of every IP
packet used for packet classification. The valid range is between 0 and 63
with a default value of 34.
Wireless Configuration 6 - 77