Motorola Solutions WiNG 5.2.6 Reference Manual page 458

10 - 4 WiNG 5.2.6 Access Point System Reference Guide
5. Select View Events
Use the View Events
Configure events screen.
6. Refer to the following event parameters to assess nature and severity of the displayed event:
Timestamp
Module
Message
Severity
Source
Hostname
7. Select Clear All
8. Select Event History
Use the Event History screen to track events impacting either a selected device or those impacting the access
point's default RF Domain.
from the upper, left-hand, side of the Fault Management browser.
Figure 10-2 Fault Management View Events screen
screen to track and troubleshoot events using source and severity levels defined in the
Displays the timestamp (time zone specific) when the event occurred.
Displays the module used to track the event. Events detected by other modules
are not tracked.
Displays error or status messages for each event listed.
Displays the severity of the event as defined for tracking from the
Configuration screen. Severity options include:
All Severities – All events are displayed regardless of their severity
Critical – Only critical events are displayed
Error – Only errors are displayed
Warning – Only warnings are displayed
Informational – Only informational events are displayed
Displays the MAC address of the source device tracked by the selected
module.
Displays the Wing assigned hostname of the device tracked by the selected
module.
to clear the events displayed on this screen and begin a new data collection.
from the upper, left-hand, side of the Fault Management browser.