Motorola Solutions WiNG 5.2.6 Reference Manual page 44

3 - 18 WiNG 5.2.6 Access Point System Reference Guide
• Country - Select the Country where the access point is deployed. The access point prompts for the correct
country code on the first login. A warning message also displays stating an incorrect country setting may result
in illegal radio operation. Selecting the correct country is central to legal operation. Each country has its own
regulatory restrictions concerning electromagnetic emissions and the maximum RF signal strength that can be
transmitted. This is a required parameter.
• Time Zone - Set the time zone where the access point is deployed. This is a required parameter. The setting
should be complimentary with the selected deployment country.
25. If an NTP resource is unavailable, set the
26.Optionally enter the IP address of a server used to provide system time to the access point. Once the IP address
is entered, the
the NTP resource.
27. If an NTP resource is unavailable, set the
28.Optionally enter the IP address of a server used to provide system time to the access point. Once the IP address
is entered, the
the NTP resource.
29.Select Next. The Initial AP Setup Wizard displays the
(pages) and settings updated using the Initial AP Setup Wizard.
There's no user intervention or additional settings required within this screen. Its an additional means of
validating the configuration before its deployed. However, if a screen displays settings not intended as part of the
initial configuration, the screen can be selected from within the Navigation Panel and its settings modified
accordingly.
System Date and Time
Network Time Protocol (NTP)
System Date and Time
Network Time Protocol (NTP)
(calendar date, time and AM/PM designation).
functionality is engaged automatically for synchronization with
(calendar date, time and AM/PM designation).
functionality is engaged automatically for synchronization with
Summary and Commit screen to summarize the screens