Setting The Access Control Configuration - Motorola Solutions WiNG 5.2.6 Reference Manual

9.2 Setting the Access Control Configuration

Refer to the Access Control
HTTPS, Telnet, SSH or SNMP). Access options can be either enabled or disabled as required. Motorola Solutions
recommends disabling unused interfaces to reduce security holes. The Access Control tab is not meant to function as an
ACL (in routers or other firewalls), where you can specify and customize specific IPs to access specific interfaces.
The following table demonstrates some interfaces provide better security than others and are more desirable.
Access Type
Telnet
HTTP
HTTPS
SSHv2
To set user access control configurations:
1. Select Configuration
screen to allow/deny management access to the network using selected protocols (HTTP,
Encrypted
No
No
Yes
Yes
> Management.
Authenticated
Yes Disabled
Yes Disabled
Yes Disabled
Yes Disabled
Management Access
Default State
9 - 5