Motorola Solutions WiNG 5.2.6 Reference Manual page 35

12.Set the following DHCP and Static IP Address/Subnet information for the LAN interface:
• Use DHCP - Select the checkbox to enable an automatic network address configuration using the access point's
DHCP server. AP-6511 and AP-6521 model access points do not have an onboard DHCP server and an external DHCP
server must be utilized.
• Static IP Address/Subnet - Enter an IP Address and a subnet for the access point's LAN interface. If Use DHCP is
selected, this field is not available. When selecting this option, define the following DHCP Server and Domain Name
Server (DNS) resources, as those fields will become enabled on the bottom portion of the screen.
• Use on-board DHCP server to assign IP addresses to wireless clients -Select the checkbox to enable the access
point's DHCP server to provide IP and DNS information to clients on the LAN interface.
• Range - Enter a starting and ending IP Address range for client assignments on the access point's LAN interface.
Avoid assigning IP addresses from x.x.x.1 - x.x.x.10 and x.x.x.255, as they are often reserved for standard net-
work services. This is a required parameter.
• Default Gateway - Define a default gateway address for use with the default gateway. This is a required
parameter.
Figure 3-8 Initial AP Setup Wizard - LAN Configuration
Quick Start 3 - 9