Motorola Solutions WiNG 5.2.6 Reference Manual page 385

Figure 7-11 Wireless IPS screen - WIPS Events, AP Anomaly tab
AP Anomaly events are suspicious frames sent by neighboring APs. Use the AP Anomaly tab to enable or disable an
event.
14.Enable or disable the following AP Anomaly Events:
Name
Enable
15.Select OK to save the updates to the AP Anomaly configuration used by the WIPS policy. Select
last saved configuration. The WIPS policy can be invoked at any point in the configuration process by selecting
Activate Wireless IPS Policy
Displays the name of each AP Anomaly event. This column lists the event
tracked against the defined thresholds set for interpreting the event as
excessive or permitted.
Displays whether tracking is enabled for each AP Anomaly event. Use the
drop-down menu to enable/disable events as required. A green checkmark
defines the event as enabled for tracking against its threshold values. A
red "X" defines the event as disabled and not tracked by the WIPS policy.
Each event is disabled by default.
from the upper, left-hand side, of the access point user interface.
Security Configuration 7 - 25
Reset to revert to the