Graph - Motorola Solutions WiNG 5.2.6 Reference Manual

12.4.6 Graph


Wireless Client Statistics
Use the Graph to assess a connected client's radio performance and diagnose radio performance issues that may be
negatively impacting performance. Up to three selected performance variables can be charted at one time. The graph uses
a Y-axis and a X-axis to associate selected.
To view a graph of this client's statistics:
1. Select the Statistics
2. Select System
point, then a connected client.
3. Select Graph.
4. Use the Parameters
5. Use the Polling Interval
minute, 5 minutes, 20 minutes or 1 hour. 30 seconds is the default value.
6. Select an available point in the graph to list the selected performance parameter, and display that parameter's value
and a time stamp of when it occurred.
menu from the Web UI.
from the navigation pane (on the left-hand side of the screen). Expand the RF Domain, select an access
drop down menu to define from 1- 3 variables assessing signal noise, transmit or receive values.
drop-down menu to define the interval the chart is updated. Options include 30 seconds, 1
Figure 12-68 Wireless Clients - Graph
Statistics 12 - 123