Motorola Solutions WiNG 5.2.6 Reference Manual page 187

7. Define a 64 character maximum
The Preferred group is the Virtual Controller group the access point would prefer to connect upon adoption.
8. Set the Controller Hello Interval
Hello Interval
Adjacency Hold Time
9. Use the spinner control to set the
This is the VLAN the Virtual Controller is reachable on. Select between 1 - 4094. There is no default value for this
setting.
10. Use the + Add Row button to populate the Controller Hostnames table with the following host, pool and routing
parameters for defining the preferred Virtual Controller adoption resource.
Host
Figure 5-70 Profile Overrides - Adoption screen
Preferred Group.
to set the interaction intervals between AP and its adopting resource.
Select this option to define the interval of hello packet exchanges between the
AP and its adopting controller.
Select this option to define the interval after which the link between the AP
and controller is defined as lost and a new connection needs to be established.
Controller VLAN.
Use the drop down menu to either define a numerical IP address or hostname
of a Virtual Controller resource.
Device Configuration 5 - 129