Motorola Solutions WiNG 5.2.6 Reference Manual page 446

9 - 8 WiNG 5.2.6 Access Point System Reference Guide
8. Set the following
Filter Type
IP Access List
Source Hosts
Source Subnets
Logging Policy
9. Select OK
Access Restrictions:
Use the drop-down menu to select the filter mechanism used as the
management policy access restriction. Options include source-address,
ip-access-list and None.
Use the drop-down menu to select an existing list of IP addresses used to
control connection access to the access point. A default list is available, or
a new list can be created by selecting the Create icon. An existing list can
also be modified by selecting the Edit icon.
Set multiple source host IP address resources.
Define a list of subnets allowed administrative access. Use the Clear link to
the right of each host if wishing to remove that IP address.
Use the drop-down menu to set the logging policy for administrative
access. Select from None, denied-only (logs denied requests only) and All
(logs all requests).
to update the access control configuration. Select Reset to revert to the last saved configuration.