Motorola Solutions WiNG 5.2.6 Reference Manual page 220

5 - 162 WiNG 5.2.6 Access Point System Reference Guide
6. Set or override the following parameters to define the ARP configuration:
Switch VLAN
Interface
IP Address
MAC Address
Device Type
7. Select the
last saved configuration.
Figure 5-85 Profile Overrides - Network ARP screen
Use the spinner control to select a VLAN (1 - 4094) for an address requiring
resolution.
Define the IP address used to fetch a MAC Address.
Displays the target MAC address that's subject to resolution. This is the MAC
used for mapping an IP address to a MAC address that's recognized on the
network.
Specify the device type the ARP entry supports (either Host, Router or DHCP
Server). Host is the default setting.
OK button to save the changes and overrides to the ARP configuration. Select Reset to revert to the