Motorola Solutions WiNG 5.2.6 Reference Manual page 174

5 - 116 WiNG 5.2.6 Access Point System Reference Guide
3. Define the following configuration parameters required to Create New Self-Signed Certificate:
Certificate Name
Use Existing
Create New
4. Set the following
Certificate Subject
Name
Figure 5-65 Certificate Management - Create Certificate screen
Enter the 32 character maximum name assigned to identify the name of the
trustpoint associated with the certificate. A trustpoint represents a CA/identity
pair containing the identity of the CA, CA-specific configuration parameters,
and an association with an enrolled identity certificate.
Select the radio button and use the drop-down menu to select the existing key
used by both the device and the server (or repository) of the target RSA key.
To create a new RSA key, select the radio button to define 32 character name
used to identify the RSA key. Use the spinner control to set the size of the key
(between 1,024 - 2,048 bits). Motorola Solutions recommends leaving this
value at the default setting (1024) to ensure optimum functionality. For more
information on creating a new RSA key, see
5-111.
Certificate Subject Name
Select either the auto-generate radio button to automatically create the
certificate's subject credentials or select user-defined to manually enter the
credentials of the self signed certificate. The default setting is auto-generate.
RSA Key Management on page
parameters required for the creation of the certificate: