Motorola Solutions WiNG 5.2.6 Reference Manual page 130

5 - 72 WiNG 5.2.6 Access Point System Reference Guide
Overload Type
NAT Pool
Overload IP
21. Select OK
configuration.
Select the radio button of Overload Type used with the listed IP ACL rule.
Options include NAT Pool, One Global Address and Interface IP Address.
Interface IP Address is the default setting. If NAT Pool is selected, provide
the Overload IP address.
Provide the name of an existing NAT pool for use with the dynamic NAT
configuration. Optionally select the Create icon to define a new NAT Pool
configuration.
Enables the use of one global address for numerous local addresses.
to save the changes made to the dynamic NAT configuration. Select Reset to revert to the last saved