Led Indicators; Initial Access Point Configuration - Motorola AP 6522M Installation Manual

Hide thumbs Also See for AP 6522M:

Table of Contents

Installation Guide

CAUTION

2.6 LED Indicators

AP 6522M Access Points have LED activity indicators on the side of the case.

The LEDs provide a status display indicating error conditions, transmission, and network activity for the 5 GHz

802.11an (amber) radio or the 2.4 GHz 802.11bgn (green) radio.

Task

Unadopted

Off

Normal

• If this radio band is enabled:

Operation

• If this radio band is disabled:

• If there is activity on this band:

Firmware

Update

Sensor Mode Blink interval at 5 times a second

If not using a 802.3af capable controller to power the AP 6522M,

ensure only the AP 6522M's designated power supply

(PWRS-14000-148R) is used to supply power to the Access Point.

Using an incorrectly rated power supply could damage the unit and

void the product warranty. Do not actually connect to the power

source until the cabling portion of the installation is complete.

5 GHz Activity LED (Amber)

Blink at 5 second interval

Off

Blink interval at 1 time per second

2.4 GHz Activity LED (Green)

Blink interval at 5 times a second