Ethernet Specifications; Ethernet Port Defaults (All Port Types) - Alcatel OmniSwitch 6800 Series Network Configuration Manual

Ethernet Specifications

Ethernet Specifications
IEEE Standards Supported
Ports Supported
Switching/Routing Support
Backbone Support
Port Mirroring Support
802.1Q Hardware Tagging
Maximum Frame Size

Ethernet Port Defaults (All Port Types)

The following table shows Ethernet port default values.
Parameter Description
Trap Port Link Messages
Flow Control
Interface Configuration
Maximum Flood Rate (for
Broadcast Traffic)
Maximum Flood Rate (for
Multicast Traffic)
Peak Flood Rate Configuration
Interface Alias
Inter-Frame Gap
Maximum Frame Size
page 1-2
802.3 Carrier Sense Multiple Access with Collision Detection
(CSMA/CD)
Ethernet (10 Mbps)
Fast Ethernet (100 Mbps)
Gigabit Ethernet (1 Gb/1000 Mbps).
Layer 2 Switching/Layer 3 Routing
Fast Ethernet and Gigabit Ethernet ports
Fast Ethernet and Gigabit Ethernet ports
Fast Ethernet and Gigabit Ethernet ports
1553 bytes
Command
trap port link
N/A
interfaces admin
interfaces flood
interfaces flood multicast
interfaces flood rate
interfaces alias
interfaces ifg
interfaces max frame
OmniSwitch 6800 Series Network Configuration Guide
Configuring Ethernet Ports
Default Value/Comments
Disabled
Enabled
Up (Enabled)
Enable
Disable
42 Mbps (Fast Ethernet)
496 Mbps (Gigabit Ethernet)
None configured
12 bytes
1553 (untagged) Ethernet packets
1553 (tagged) Ethernet packets
9216 Gigabit Ethernet packets
November 2004