Summit Xgm2-2Xf Option Card - Extreme Networks Summit X150 Series Hardware Installation Manual

Summit XGM2-2xf Option Card

The Summit XGM2-2xf option card allows you to add one or two 10-gigabit XFP modules to the
following switches:
Summit X350 series switch, running ExtremeXOS 12.1.2 (or later)
●
Summit X450a-24t switch, running ExtremeXOS 11.5.0 (or later)
●
Summit X450a-24tDC switch, running ExtremeXOS 11.5.0 (or later)
●
Summit X450a-24x switch, running ExtremeXOS 11.6.1 (or later)
●
Summit X450a-24xDC switch, running ExtremeXOS 11.6.1 (or later)
●
Summit X450a-48t switch, running ExtremeXOS 11.5.0 (or later)
●
Summit X450e-24p switch, running ExtremeXOS 11.5.0 (or later)
●
Summit X450e-48p switch, running ExtremeXOS 11.6.1 (or later)
●
Summit X450e-24t switch, running ExtremeXOS 12.5.1 (or later)
●
Summit X450e-48t switch, running ExtremeXOS 12.5.1 (or later)
●
Figure 119 shows the Summit XGM2-2xf option card.
Figure 119: Summit XGM2-2xf Option Card
The ports on the XGM2-2xf option card can be configured as alternate stacking ports in a SummitStack
configuration that uses the SummitStack-V feature. For more information about stacking Summit family
switches, see Chapter
For current information about compatible XFP modules and the minimum required software, refer to
the most recent version of the ExtremeXOS Hardware and Software Compatibility Matrix.
For more information about XFP modules, refer to the Extreme Networks Pluggable Interface Modules
Installation Guide.
Summit Family Switches Hardware Installation Guide
SH_011
5.
Summit XGM2-2xf Option Card
161