Summit Xgm2-2Xf Option Card - Extreme Networks Summit X150 Series Hardware Installation Manual

Summit Option Cards
Figure 167: Summit XGM2-2xn Option Card
NOTE
Refer to the Extreme Networks Pluggable Interface Modules Installation Guide for more information about XENPAK
modules.
Standards-based CX-4 XENPAKs are also recognized by ExtremeXOS; contact your CX-4 module vendor to obtain
these.

Summit XGM2-2xf Option Card

The Summit XGM2-2xf option card allows you to add up to two 10-gigabit XFP modules to the
following switches:
Summit X450a-24t switch, running ExtremeXOS 11.5.0 (or later)
●
Summit X450a-24tDC switch, running ExtremeXOS 11.5.0 (or later)
●
Summit X450a-24x switch, running ExtremeXOS 11.6.1 (or later)
●
Summit X450a-24xDC switch, running ExtremeXOS 11.6.1 (or later)
●
Summit X450a-48t switch, running ExtremeXOS 11.5.0 (or later)
●
Summit X450e-24p switch, running ExtremeXOS 11.5.0 (or later)
●
Summit X450e-48p switch, running ExtremeXOS 11.6.1 (or later)
●
The Summit XGM2-2xf option card is compatible with the following 10-gigabit XFP modules:
LR XFP module
●
SR XFP module
●
Figure 168 shows the Summit XGM2-2xf option card.
198
SH_010
Summit Family Switches Hardware Installation Guide