Setting Webui Authentication - Zte ZXR10 8900 Series User Manual

ZXR10 8900 Series User Manual (FW Volume)
20 Confidential and Proprietary Information of ZTE CORPORATION
To view the id needed for deleting one service, execute com-
mand service show.

Setting WEBUI Authentication

WEBUI authentication means administrator can access ZXR10
8900 Series Switch FW service card only after passing both
certificate authentication and username/password authentication.
1. Restoring WEBUI system root certificate.
Command
ZXR10_FW.system #webui cert
<restore>
Parameter Description:
Parameter
cert
<restore>
Tip:
In WEBUI authentication, FW system must import PEM for-
�
mat certificate and client must import PCKS#12 format cer-
tificate. Client can obtain this certificate from CA. For de-
tails, please contact enterprise certificate administrator.
When enabling WEBUI authentication, to log into WEBUI
�
management interface, administrator must provide corre-
sponding certificate for passing authentication.
Before authentication, administrator needs to import per-
�
sonal certificate into Internet browser. For details, please
contact enterprise certificate administrator.
2. Showing WEBUI setting.
Command
ZXR10_FW.system #webui show
3. Seting WEBUI timeout time.
Command
ZXR10_FW.system #webui idle-timeout
<number>
Parameter Description:
Description
Setting WEBUI system root certificate.
This restores root certificate.
Function
This restores
WEBUI system root
certificate.
Function
This shows WEBUI
setting.
Function
This sets WEBUI
timeout time.