2.3.4
Connection to the PU connector
Using the PU connector, you can perform communication operation from the parameter unit (FR-PU07), enclosure surface
operation panel (FR-PA07), or a personal computer, etc.
Remove the drive unit front cover when connecting.
(1)
When connecting the parameter unit or enclosure surface operation panel using a connection cable
Use the optional FR-CB2 or connector and cable available on the market.
Insert the cable plugs securely into the PU connector of the drive unit and the connection connector of the FR-PU07, FR-PA07
along the guide until the tabs snap into place.
Install the drive unit front cover after connecting.
Operation panel
FR-PA07 (option)
REMARKS
292
Refer to page
Keep the total cable length within 20m.
Parameter unit connection cable
(FR-CB2
)(option)
Parameter unit
FR-PU07
(option)
for the commercially available connection cables and connectors when fabricating a cable on the user side.
Control circuit specifications
PU connector
2
25