PU connector
3.5
PU connector
Using the PU connector, you can perform communication operation from a parameter unit
FR-PU07/FR-PA07 or a personal computer. Parameter setting and monitoring can be per-
formed by FR Configurator.
Remove the inverter front cover when connecting.
3.5.1
Connecting the parameter unit
A FR-PU07/FR-PA07 parameter unit can be connected via the FR-A5CBL line to the inverter
and, e.g. then mounted onto a control cabinet to control the inverter from there. The maximum
line length must not exceed 20m.
When connecting, make sure that the plugs in the inverter and in the parameter unit are correctly
engaged. Install the inverter front cover after connecting.
Fig. 3-22: Connecting a parameter unit using a connection cable
3 - 30
Cable FR-A5CBL (option)
FR-PA07
FR-PU07
Fig. 3-21:
PU connector
PU connector
Wiring
I001990E
I001991