Floor Mount Installation - Wooden Floor - Toshiba Strata DK 280 Installation Manual

Instructions for floor mounting a DK280 on a wooden floor.
2. Position the Base Cabinet at the selected installation location.
3. Using a marking pen or pencil, mark the floor where holes will be drilled.
4. Move the Base Cabinet prior to drilling.
Cover the Base Cabinet with a suitable drop cloth to prevent contamination
Note:
power equipment by dust created during drilling.
5. Drill pilot holes to make insertion
wood flooring.
6. Move the Base Cabinet into position on the equipment room floor.
7. Secure the Base Cabinet to the floor using lag bolts, lockwashers, and flat washers as
shown in Figure 3-17.
CABINET
Figure
3-1 7
-
Floor Mount Installation
3-24
of
Wooden Floor
o f
1996
January