Toshiba Strata DK 280 Installation Manual page 200

1 ATI
TOSHIBA
POW OTR 0%
I
Ai
RATI (FRONT VIEW)
RATI PCB
L l/8" MINI AUDIO JACK
(To Tape Recorder "RECORD" Input)3
l/8" MINI AUDIO JACK4
(Not Used)
Notes:
1. Do not cut HEADSET jumper.
2, Cut CARBON jumpers if a carbon handset is connected to the RATCH handset cradle.
3. "REC OUT" can be used to monitor or record
the attendant
console
talkpath. Both the attendant and connected
party will be monitored or recorded. The record level output from the attendant handset or headset is
approximately 3 dB below the connected party record level.
4. "AUX IN" can be used to send audio to the attendant and connected party. The audio level to the attendant is
approximately 10 dB below the audio level sent to the connected patty. Audio sent to the outside party is
limited to -15d5v (CO Tip/Ring).
General Note:
l
See Figure 7-34 in Chapter
7-Wiring Diagrams for RAT/ cab/e wiring information.
I
Figure 5-20
RATI Assembly/Disassembly
5-22
January
1996