Toshiba Strata DK 280 Installation Manual page 349

Table 8-2 (continued)
Multidimensional Program: Program 30 - Station Class of Service
Press...
Step Buttons + LED buttons
No.
Action description
LCD RESPONSE . . .
,
:
6. LED buttons 01 - 20 (continued)
LED 14: Account Codes Verified
LED 15: Verified Account Code Revision Authority
LED 16: Traveling Class of Service Code Revision
Authority
LED 17:
Do Not Disturb Override Allowed
LED 18: Executive Override Allowed
LED 19: Privacy Override Allowed
LED 20: Not Used
If programming a port range, the LED indications are as
follows:
l
LED-ON, all ports in range are enabled for that
item.
l
LED-OFF, all ports in range are disabled for that
item.
l
LED-FLASHING, some ports in range are enabled
and
some
ports are disabled.
7. Hold 30 SELECT = (000 - 239)
Secure data in system programming.
DATA PROGRAMMED
8. Spkr (Speaker) 30 SELECT =
Prepare system for another selection (go back
to
step 5), or exit Program 30 (continue with Step 9).
9. # # Hold 30 SELECT = ##
Secure Program 30 data in system memory. DATA PROGRAMMEiD
IO.
Spkr (Speaker) PROGRAM =
Exit Program 30. Enter another program number,
or exit programming mode (go to Step 11).
System beeps to indicate it is exiting Program 30.
Il. # # Hold NO.
205
Exit programming mode.
JAN 20 SUN
06:58
DK"O'W
January
1996
8-9