Toshiba Strata DK 280 Installation Manual page 774

,
Assigning a mailbox to store
tllW.3gW
1, Press a [DN].
2. Press # 6 5 6.
I
.
3. Dial the digits (up to 16)
and pauses to be sent.
4.
Press RDL to store
data.
[OLTl]
,,
Assigning a mailbox for
message retrieval for a
Directory Number:
1. Press a [DN].
2.
Dial # 6 5 7.
3. Dial the required digits
and pauses to be sent.
4.
Press RDL to store
data.
To Retrieve Messages:
p Press the flashing
MW/FL button
assigned to the [DN].
Assign a Voice Mail Message Mailbox
Press the [DN] that you want to assign a mailbox number. When you assign a
mailbox for a [DN], calls to that [DN] will be able to forward directly to the [DN]'s
voice mailbox on the Toshiba voice mail system.
The LCD displays the digits and pauses. These digits include special voice mail
codes and the [DN] voice mailbox number. For example, for Toshiba voice mail
systems dial 91 NNN, where NNN is the mailbox number of !he [DN] you pressed
in Step 1.
You will hear a confirmation tone.
Assign Voice Mail Retrieval Digits
When you want to retrieve your messages from voice mail, certain digits will
automatically be sent to the voice mail unit to play back your messages.
Press the [DN] for which you want to retrieve messages
The LCD displays "6 5 7 ID CODE SET'.
The LCD displays the data as it is entered. These digits include special voice
mail codes and the [DN] mailbox number. For example, for Toshiba Systems dial
92NNN, where NNN is the [DN] mailbox number.
You will hear a confirmation tone-the LCD displays "DATA PROGRAMMED".
Retrieve Voice Mail Messages
When a voice message is received for a [DN]. the voice mail system will cause
the MW/Fl. button/LED to flash.
To Clear All Digits:
1. Press a [DN].
2. Dial # 6 5 6 or
#657.
3. Press RDL.
Busy Field Display
Your telephone must be idle to use the MODE button when Soft Keys are turned
ON.
Note:
The Busy Lamp Field (ELF) mode will stop all other displays from
appearing on your telephone LCD.
To Display Busy Field
status:
1. Press MODE,
lhlODE
NO.? ]
I,,,
2. PressI.
3. Enter the first one or
two digits of a [DN] + #
[:::::::::::::I
Wm.
4. Press PAGE to rotate
Busy Field groups.
To Exit Any Mode:
1. Press MODE.
2. PressO.
Enter the first digit of a 3.digit [DN] (e.g., 2 for 200) or the first two digits of a
four-digit [DN] (e.g., 21 for 2100).
Mode Exit
The LCD displays "MODE NO.?" Your telephone must be idle to use the MODE
button when Soft Keys are turned ON.
The LCD displays date/day/time.
28 29