Toshiba Strata DK 280 Installation Manual page 406

use in Strata DK280 Release 3, Program
45
dial
plan 7, 8, and 9 only.)
Programs 46-I I - 46-8 1
These programs should be
exception table assignments.
run for area/office code
4 LEDs 01 u 16-Area Code/Office Code Exception
Tables 1 m 16-Select the exception tables that
apply to the class being defined by marking an X
in the box. Exception tables for both area and
office codes will be defined in Program 47.
Note:
Each class can be assigned any or all of the
16 available office code exception tables.
Program 47-Toll Restriction Exception Office
Codes Assigned by Area Codes (Tables 1 m 16)
This program defines exceptions to previously defined
office code restrictions for up to 16 area codes,
allowing six-digit Toll Restriction. Office codes entered
in Tables 1 w 16 are opposite of what is defined for the
area code by Program 46-2 w 4. For instance, if
Program 46 denies area code 714, entering office
codes 530 and 555 into an exception table for area
code 714 will allow those office codes. The RCTUC/D
common control unit can support up to 16 tables, while
the RCTUA, RCTUBA/BB and RCTUB units can
support eight.
Each area code with exception office codes requires a
table. Each table may hold up to 800 exception office
codes.
Enter the area code and required office codes on the
record sheet.
Program 48-Station Toll Restriction
Classification
This program assigns a combination of two restrictions
to each station port defined in the system. The first
feature is Digit Restriction and the second is Station
Restriction Assignment.
Digit Restrict Code
If, Digit Restrict is enabled for a particular station, the
station is able to dial the number of digits defined in
the Program 45-l Toll Restriction dialing plan.
n 1: Enable Digit Restriction-Enter 1 in the Digit
Restrict Code column, next to the port number to
enable the restriction for the station. This is used
to prevent a user from dialing a second call when
dial tone is returned from a CO after the outside
party disconnects.
n 2: Disable Digit Restriction-Enter 0 in the Digit
Restrict Code column, next to the port number to
disable digit restriction for the station. This allows
toll restricted users to dial any number of digits
(e.g., to an external voice mail device, computer,
etc.).
Station Restrict Code
The second feature assigns Toll Restriction to individ-
ual station ports, in addition to previous restrictions. It
includes eleven different choices. One of the choices
must be entered for each port. Initialized data assigns
0 or no restrictions to all ports. The eleven choices are
explained as follows.
Note:
Station restrictions are overridden by lines
disabled as defined in Program 45-2. If a
station port has appearance of a line with
restrictions disabled, the restrictions will be
removed from the station on an individual line
basis through Program 45-2.
q 0: No Station Toll Restriction-Enter 00 in the
Station Restrict Code column, next to the port
number, to remove Toll Restrictions from the
station.
n 1: Area Code Toll Restriction-Enter 01 in the
Station Restrict Code column, next to the port
number if the selected station must be restricted
from dialing all area codes.
n 2: Area Code Toll Restriction and "0" or "1" as a
1st (or 2nd digit)-Enter 02 in the Station Restrict
Code column, in the space available for the port
number, if the selected station must be restricted
from dialing all area codes and
+ 0 or 1 when used as a first or second digit for
the old dial plan 1, 2 or 3 defined in Program
45-1
+ 0 or 1 when used as a first digit for the new
dial plan 7, 8 or 9 (with upgraded NANP
software) defined in Program 45-I.
This restriction prevents the station from making
any long distance calls or operator-assisted calls,
in addition to outgoing calls outside the home area
code. In applicable areas, this prevents long- dis-
tance office codes from being dialed (if 1 +NNX).
9-46 January 1996