Toshiba Strata DK 280 Installation Manual page 715

c
Button Namer Button Definitions
CPIPG Park/Page Button
Press to park internal or outside call in orbit and announce to other telephones
or paging speakers to retrieve the parked calls.
PARK
PAUA
PAU
[PhDN]
PKUP
PKUP (1. 2, 3, or 4)
PI.
PRIV
PRV RLk
Button Names Button Definitions
Park Button
Press lo park internal or outside calls in an orbit. Call retrieval can be made
locally from the same parking telephone or remotely from a different telephone.
Pause (Long) Button
Press to insert a lo-second pause when programming Speed Dial numbers.
Pause Button
Press to set either a one-half or two-second pause when programming Speed
Dial numbers. (The pause time is set in system programming).
Primary Directory Number Button
Press to answer a call to the Primary Directory Number or to initiate a phone
call. The [PDN] is specifically your Extension Number or Intercom Number. Your
telephone can have up to four [PDN] buttons with your number. See Appendix B
for more information.
Phantom Directory Number Button
Up to eight Phantom Directory Numbers can be dedicated to a station or shared
by a group of stations. See Appendix B for more information on [PhDNs].
Call Pickup Button
Press to initiate a Directed Call Pickup of CO line, [DN], and page calls.
Tenant Call Pickup q tdtons
If the system is shared by tenants, the Directed Pickup 1 - 4 buttons pick up
ringing CO line calls for Tenants 1 - 4 respectively.
Pooled Line Button
Press to access an available CO line from a group of lines appearing under one
button.
Privacy Button
Press to block Privacy Override on common CO line buttons. This button does
not block Busy Override or Executive Override.
Privacy Release Button
Press to release privacy on common CO line buttons, enabling other station
users to enter your conversations on those buttons. Privacy release does not
apply to common [DN] buttons which are always private.
SD
SDS
SPKR
TONE
RDL
Redial Button (Fixed)
Press to have the system redial the last telephone number you dialed, or begin
to store a speed dial number.
RLS/ANS Release and Answer Button
Press to disconnect or complete the transfer the current CO or [DN] call and
automatically answer the new incoming CO or [DN] call. Operational for Pooled
Lines, [DN]. and CO line buttons.
RLS Release Button
Press lo disconnect or complete the transfer of the current CO or [DN] call and
lo place your station in the idle condition.
SAVE Save Button
After dialing an outside or internal directory number, press to "save" the number.
Later, you can have the system automatically radial the number for you when you
press the button after accessing an internal or olitside line.
Speed Dial Button
Press to Speed Dial a telephone number or feature access codes.
Speed Dial Select
Press to store and access Speed Dial number.
Speaker Button (Fixed)
Press to turn the speaker on/off. This button will also select a line or the internal
[PDN] if programmed for auto preference in system programming. Also, used to
disconnect on-hook speakerphone calls.
Tone Button
Press to change the outgoing dialing of the CO line in use from dial pulse to tone
signaling.
6 7