Toshiba Strata DK 280 Installation Manual page 778

c
3. Press SPKR.
pJzJXJ
I.,
To Clear Name/Number
Display:
1. Press a [DN] +
#620.
2. Press SPKR.
During clear:
I,,,,]
_.
After clear:
[OAIN:;M:)O]
."
To Erase Name/Number
Display:
1. Press a [DN] +
#621.
lUJlR
2. Press 1 in the alpha
mode to enter blanks
3. Press SPKR
The new information is stored and will appear on the top line of the display. For
example, if you entered "TOSHIBA EXT. 200", that will appear above the
date/day/time on the display.
You will hear a confirmation tone, then a busy tone.
Notes:
When user name is
set,
your title will appear on the LCD during
direct, forwarded, and hunted calls. On override or OCA cak, the
LCD will not display the title.
After a name is cleared, it may be redisplayed at any time by
pressing a [DN] + # 6 2 I.
A name is displaced by message and caN forward settings if they are
Set.
Current information will appear on the lower line of the LCD
To erase Name/Number information from memory. enter blanks at the '"User
Name" prompt. Refer to "Recording a Message" earlier in this chapter for more
information.
The erased Name/Number information should be gone.
To Enter Name/Number
Information for Other
Stations/Devices
1. Turn off Soft Keys by
pressing MODE +
7 0, when your
telephone is idle.
2. Press a [DN] +
#621.
Entering Name/Number information for other stations or devices is only allowed
from Station 200.
Currant information for station 200 will appear on the lower line of the LCD.
3. Press PAGE
IDES, EKT NO.? 1
-I
4. Dial the [PDN] of the
station for which the
Name/Number
information is to be
recorded.
[0161111]
_"
5. Press PAGE.
USER NAME?
I
6. Enter the new
information via the dial
pad (refer to Recordina
a M&sage for methodj
7. Press the SPKR
button.
In this display, "EKT" stands for the Primary Directory Number of the digital,
electronic or standard telephone.
"USER NAME?" appears on the upper line of the LCD, and current information
for station NNN appears on the lower line of the LCD.
Up to 16 characters can be recorded. It is recommended that you enter the
station number along with the user's name.
The new information is stored and appears on the top line of station NNN's LCD
.Station 200's LCD returns to the normal idle display.
36
37