Toshiba Strata DK 280 Installation Manual page 677

Remote Site
Public Telephone
Network Strata DK280
PC or Terminal
Remote
Station B
Remote
Station C
Rco Line
Weather
CO Line A
CO Line B
CO Line C
KCOLineA 1
IMDU or RMDS
I
Data Buss
Figure 13-8
Test Mode Function Diagram
Digital
Telephone XX
+ co-to-co
Connection
13.11.1 Remote Called Station Message
13.11.2 Remote Calling Station Message
Mode
Mode
Allows the terminal to set a Called Station Message
for an originating station with the destination of the
message being a station or group of stations.
When the message is set, the Msg (Message) LED(s)
on the destination station(s) flash.
Allows the terminal to set a Calling Station Message
for a station. The message will be set on the station's
LCD and is automatically displayed on other stations'
LCDs whenever they call that station.
When a destination station calls the originating station,
the message is displayed on the destination station's
LCD.
Mode 95:
To edit and/or review a Calling Station
Message before setting it, use this mode. It will display
the existing message and allow additions to it (such as
a time or a date) before it is set. (The message cannot
be changed with this mode-just added to.)
Mode 94:
To edit and/or review a Called Station
Message before setting it, use this mode. It will print
out the existing message and allow additions to it
(such as a time or a date) before it is set. (The
m,essage cannot be changed with this mode-just
added to.)
Mode
97: To add or change a Calling Station
Message before setting it, use this mode. It does not
display the existing message, but allows a completely
new message to be entered before it is set.
Use the procedures in the tables to set messages via
Modes 94196 and 95197.
Mode 96:
To add or change a Called Station Message
before setting it, use this mode. It does not display the
existing message, but allows a completely new
message to be entered before it is set.
13-14
January 1996