Toshiba Strata DK 280 Installation Manual page 357

Table 8-9
Program 04 - Station Logical Port Primary Directory Intercom or Number Assignment
Press...
Step
Buttons
+ LED
buttons
No. Action description LCD RESPONSE ;..
1. Use the programming LCD electronic or digital telephone
NO. 205
with programming template connected to physcial port 005
JAN 20 SUN
06:43
(station 205) - circuit 6.
2.*#*#1*2*3 PROGRAM MODE
Enter programming mode. (Do not press
Intercom
or
[DN]
button.)
3. Spkr 0 4 Hold PROGRAM = 04
Access Program
04.
System beeps after
Spkr (Speaker)
DATA STORE
is pressed to indicate a program number may be entered.
4. Spkr (Speaker)
Prepare system for a selection.
5. ooo##-239#
Select the number of the port (use three digits plus #).
Initialized data assigns station numbers 200 - 439.
6. 000[1
Enter the port's station number from the record
sheet (four digits max.).
Note:
04 SELECT ='
04 SELECT = 000
INT = 200
04 SELECT = 000 - 239
INT
=XXXX
Station numbers must not exceed four digits, or
conflict with feature access codes listed in Program
05 System Record Sheet.
7. Hold
Secure data in system programming.
8. Spkr (Speaker)
Prepare system for another port selection (go back
to Step 5), or exit Program 04 (continue with Step 8).
04 SELECT = (000 ., 239)
DATA PROGRAMMED
04 SELECT =
9. # # Hold
Secure Program 04 data in system memory.
10.
Spkr (Speaker)
Exit Program 04. Enter another program number, or
exit programming mode (go to Step 10). System beeps
to indicate it is exiting Program 04.
04 SELECT = ##
DATA PROGRAMMEiD
PROGRAM =
11.
##Hold
NO.
205
Exit programming mode.
JAN 20 SUN 06:58
January
1996
8-17