Alarm Reset; Alert Signaling - Toshiba Strata DK 280 Installation Manual

Alarm Reset
Your Strata DK280 system can be connected to a facility alarm system. All
telephones will produce a startling tone whenever this alarm is activated.
Stations with an ALRM button can reset the alarm by pressing the button.
Alert Signaling
To Send an Alert Signal:
1. Press ALERT.
Alert Signaling allows a station user to alert a predesignated (partner) station by
pressing a single button.
Each time you press the assigned button, an alert tone will sound at the
designated station.
Notes:
1. You can have as many as four ALERT buttons to send/receive the
Alert Signal to/from up to four other telephones.
2. The ALERT button(s) must be assigned to telephones that will be
linked as partners.
3. The destination of the ALERT button also must be programmed as
Speed Dial numbers as follows:
Alert Signal #l destination [PDN] stored in Speed Dial i 4 8
Alert Signal #2 destination [PDN] stored in Speed Dial * 4 7
Alert Signal #3 destination [PDN] stored in Speed Dial * 4 6
Alert Signal #4 destination [PDN] stored in Speed Dial * 4 5
4. An Alert Signal will sound even if the alerted telephone is busy (on
or off hook) or in the DND mode.
49