Toshiba Strata DK 280 Installation Manual page 467

Program 30 -
Station Class of Service
Port Number(s) Enter the port number(s) to
which class of service must be assigned. See
Note 2 for entering a range of ports.
Light LEDs for the port specified in the last
step. All LEDs marked with an "x" in the
table below should be lit.
Fopy this page for more ports
*
I I
/
PORT
Feature
Priv. Override Allowed5
-- .-
Exec. Override Allowed5
DND Override Allowed
Change T.C.O. Code
Change Verified A.C.
Account Codes Verified3
SLT-Hook Flash Anti-Bounce6
Tie/DID Dial Pulse Only (No DTMF)4
Change DISA Security Code
Change TR Override Code
Forced Acc't Code3
CCAlBusy Override Automatic (Caller)'
ABR Access Enabled
~____
Speed Dial Allowed'
.____ ____-
MIC on at Start of Call
MIC Key Lock Enabled
____ -~-
Speakerphone Enabled'
-__
I
17
16
~--~
15
--.
14
13
12
11
10
__-.
09
08
--
07
--
06
_.-.
05
04
03
-
02
_-...
01
Notes:
1. Initialized data reads LEDs 01, 05, and 07 for all ports.
2. A range of ports may be specified by entering:
nnlJ~clcln
Low ,0/t-t-
High port
3. To force a verified account code to be entered on two-CO-line DISA calls through the system, turn LED 08 and 14 on for
Port 039RCTLJA, Port 089~RCTUB, RCTUBA/BB or 249~RCTU C/D and Forced A.C. must be enabled for outgoing CO
line in Program 15-7.
4. If a tie or DID line is Dial Pulse (Program 15-1, LED ON), Program 30, LED 11 must be "ON" for that tie or DID station port
number. If the DID or tie line is DTMF tone dial (Program 15-1, LED OFF) Program 30, LED 11 must be OFF and RRCS
must be installed on
RCTU.
5. Disabling this option for attendant console ports does not deny Attendant Supervised Loop Monitoring.
6. Standard Telephone (SLT) Anti-Bounce prevents false recalls due to Hook Flash bounce during SLT hang-up on outside
calls. The system automatically disconnects the CO line if the SLT hangs-up after a Hook Flash.
January 1996
*t-l Cd