Toshiba Strata DK 280 Installation Manual page 472

Program 32
- Automatic Preference (Ports 000 - 119)
nlr;mlT;i[-ilnTZ11~-~~~Hold-ISpkrmnn~Hlilnl-I-/5pkr/~~l-(-ISpkrjllil~j
SELECT = Station Logical I
I Automatic Preference Code:
Port Number Enter 00 for no selection.
Enter the port number of the
DATA = Ringing Code
J
station having preference
Enter 0 to disable Ringing Line Preference.3
Enter 01 for Primary [ON].3
Enter 02 for lowest CO, tie, or DID line.3
defined. See Note 1 for
Enter 1 to enable Ringing Line Preference.3
Enter 11 - 26 for line groups 1 - 16.2,s
entering a range of ports..
Notes:
1. Specify a range of ports by entering:
000~1700
LOW porf--ll
IHigh port
Port
Ringing
Automatic
Number
Code
Preference
IOorll
DK0207
2. RCTUA , RCTUB provides 8 CO line groups, RCTU C/D provides 16 CO line groups.
3. Intercom, lowest [PDN], lowest CO line, or Line Group will be selected only if the telephone is not ringing when
it is taken off-hook (or
Spkr
is pressed). If a telephone is ringing, Auto Preference of Intercom, [PDN], or
outgoing CO line is canceled. In this case, no selection is made if ringing line Preference is disabled or the
ringing line is selected if ringing line Preference is enabled.
General Notes:
l
For more information, see the instructions preceding the records sheets.
l
Initialized data assigns Ringing Code 1 and Automatic Off-hook (Preference) Code 00 for all ports.
1 O-56
January 1996