Toshiba Strata DK 280 Installation Manual page 781

c
To Receive a Called Station
Message:
N Press the MW/FL
button.
To Set a Calling Station
Message for Another
Station:
1. Press MODE.
2. press 9 4.
3. Dial the "destination"
Directory Number (or
enter # 3 0 for all
stations, or # 3 1 -
# 3 8 for groups).
4. Press PAGE.
5. Dial the "originatingn
[PDN].
6. Press PACE.
7. Enter the desired
message's number
8. Press PAGE.
9. Press MODE.
IO. press 0
To Receive a Called Station
Message:
l press Mw/FL.
Press these buttons when your telephone MWIFL LED is flashing
Group Called Station Messaging
This feature allows a station to set a Called Station Message for a group of
stations.
The LCD displays "MODE?".
The LCD displays "MODE 94 DEST EKT NO. NNN?".
The LCD displays "MODE 94 DEST EKT NO.NNN" or the Station Group number.
Enter t 3 0 for all call page stations, or A 3 1 - # 3 8 to send the message to a
group of stations.
Station groups correspond to the same stations that are in respective Page
groups assigned in system programming.
The LCD displays "MODE 94 ORG EKT NO.?".
Your number or another station number. The LCD displays "MODE 94 ORG EKT
NO.NN".
The LCD displays "MSG NO.?".
The LCD displays the message.
The LCD displays "MSG NO.?".
The LCD displays "MODE NO.?".
At originating station, the LCD displays date/day/time, and then displays "SENT
NNNM". At the destination station, the LCD displays the originating station
number and a message indication.
To Set a Calling Station
Message for Another
Station:
1. Press MODE when
your telephone is idle.
2. press 9 5.
3. Dial the destination
[PDN].
4. Press PAGE.
5. Enter the desired
message number.
6. Press PAGE.
7. Press MODE.
6. Press0.
Remote Calling Station Messaging
The LCD displays "MODE?".
The LCD displays "MODE 95 DEST EKT NO.NNN". This is the [PDN] to which
the Calling Station message will be set.
The LCD displays "MSG NO.?".
The LCD displays the message.
The LCD displays "MSG NO.?".
Note:
Remote calling sfafion messaging allows .yoyou fo set a Calling Sfafion
message for only one station at a time.
The LCD displays "MODE NO.?".
Your LCD shows the time and date. The message is displayed at the
"destination" station. Any station calling the '"destination" station receives the
message.
Busy Station Messaging
When reaching a busy LCD station, a massage can be sent to that station (an
audible tone will be heard). The busy station may also return a message to the
calling station's LCD. The ho stations may continue this procedure to c&y on a
"silenr' conversation.
Note:
During fhis procedure, Soff Keys can be on; however, use of Soff Keys is
not recommended OR electronic telephones.
42
43