Toshiba Strata DK 280 Installation Manual page 727

c
Call Forward-Cancel
Call Forward-External
To Cancel Call Forward-
Busy/No Answer:
l
Press CFNA
-Or-
Any of the Call Forward modes except Call Forward Fixed and Call Forward
External can be cancelled by either pressing the applicable Call Forward button
so that its associated LED turns off, or by pressing [PDN] + # 6 0
I.
then
hanging up.
The Call Fwd SusyINAns LED will turn off.
This feature enables you to forward new incoming calls directed to your [PDN] to
a destination outside of the system. [PhDNs] assigned to your telephone will not
Call Forward to external destinations. Internal calls and transferred calls to your
[PDN] also will not forward to external destinations.
Only incoming calls over CO lines dedicated to immediate ring your [PDN].
private CO button, and/or Direct In Dial line calls will forward. Any of the other
Call Forward modes can be set for your [PDNs] or [PhDNs] simultaneously with
Call Forward-External.
press a [PDN] +
#601.
To Set Call Forward-
External:
Call Forwarding a Phantom Directory Number
To Call Forward [PhDNs], your telephone must be programmed as the "ownel" if
those particular [PhDNs]. If any of the previous Call Forward instructions do not
work on your telephone, see your System Administrator for more information.
Your telephone can be programmed to have up to eight [PhDNs]; up to four of
these additional [DNs] can be programmed to have a dedicated Message
Waiting button/LED. Each [PhDN] can be set to any mode of Call Forward
independent of other [DNs] on the telephone.
Calls to your [PhDNs] will be forwarded to the destination [DN] according to the
call forwarding mode you have chosen. Phones equipped with an LCD display
will see a message indicating call forward, the call forward type, the [PhDN] that
the call is being forwarded from and the destination number the call is forwarding
to.
Note:
Ce// Forward can only be set from the station that owns the [PhDN]
button (othenvise reorder tone will be returned).
30
1. Store the number that
calls will be forwarded
to at Station Soeed Dial
location Code' 49. See
IMPORTANT I
The Call Forward-External destination can be a telephone number over a CO
line, a station over a tie line, or a station within your Strata DK280 system. If the
destination is ovsr a CO line, the CO line must only appear at your station.
Use the Speed Dial storage procedures detailed in Chapter 2. When forwardIng
to a destination over a CO line or tie line, include the CO line or tie line access
code. (See Appendix A-Table 1 for access code information.)
IMPORTANT !
You only need to perform Step 1 the first time CF-EXT is set or when
you change the destination. It is not necessary to store the CF-EXT
destination each time YOU set CF-EXT: it will remain in system memory
2. Press CF.EXT
or.
Incoming calls will forward to the destination stored at Station Speed Dial
Location 49.
press the [PDN] or
[PhDN] + # 6 7 0.
To Cancel Call Forward.
External:
l
Repeat the previous
step 2.
31