Toshiba Strata DK 280 Installation Manual page 456

Program 19 -
Alternate Background Music Source Slot Assignment
nwl;;llirll;rlnl;imW-iSpkr(RRHolal-lspl- /Turn System Power OFF (5 set) then ON 1
T-
- or -
SELECT = 1
I
Run Program 91-2 (R3)
Enter the Slot Number (11 - 66)
General Notes:
l
For more information, see the instructions preceding the record sheets.
l
If PEKU, the BGM source must be wired to Circuit 3 [Program 10-Z).
l
If PEW, the BGM source must be wired to Circuit 8 (Program 10-Z).
l
If RSTU, RSTU2, RDSU, or PSTU, the BGM source must be wired to Circuit 2. An isolation
transformer may be required if connecting the source to a RSTU, RSTU2, RDSU, or PSTU. See
Chapter 6-Peripheral Installation for isolation transformer installation instructions.
l
LED 09 (PEKU) or LED 10 (PESU) in Program IO-2 must be ON to enable the BGM connection;
Program 10-2, LED 09 and 10 must be OFF when connecting BGM to RSTU, RSTU2, RDSU or
PSTU.
l
BGM cannot be connected to the PDKU.
IMPORTANT!
If alternate BGM source is not connected to a station circuit, assign slot 11 as data in Program
19- 1. This will ensure that there is not a misoperation of PSTU/RSTU/RSTU2/RDSU ports
caused by corrupted data in RAM.
DKOl17
1 O-40
January 1996