Toshiba Strata DK 280 Installation Manual page 355

Table 8-8
Program 00 Part l-
Software Check/Remote Maintenance Security Code Assignments
Step
No.
Press...
Buttons + LED buttons
Action descriotion
--- ---- --.I- . . .
1.
Use the programming LCD electronic or digital telephone
with programming template connected to physical port 005
JAN 20
SUN
NO.
205
(station 205) - circuit 6.
06:43
2. *#*#1*2*3
PROGRAM MODE
Enter programming mode. (Do not press Intercom or [DN]
button.)
3.
4.
Spkr (Speaker) 0 0 Hold
Speaker beeps to indicate when to enter program
number. Access Program 00.
Spkr (Speaker)
Prepare system for a selection.
PROGRAM
=
00
DATA STORE
00 SELECT =
5. Select one of the following attributes:
0
View the software version. This attribute
00 SELECT = 0
is not editable.
RClAX~CbKEY
X (X
= 1,2, or 3)
- or -
NOTE:un=
THE ACTUAL VERSION
NUMBER
AND LETTER
(SEE PROGRAM 00 RECORD SHEET
FOR DETAILS)
1 nnfln Define the Level 1 remote maintenance security
code from the System Record Sheet
(four digit max.). Level 1 allows remote access to
all programs and data. Default Level 1 security
code is "0000."
- or -
00 SELECT = 1
PASSWORD = 0000
2 onno Define the Level 2 remote maintenance security
00 SELECT = 2
code from the System Record Sheet
PASSWORD = 0000
(four digit max.). Level 2 allows remote entry to
v
Programs 30 - 39 and 77 - 89 only. Default Level 2
security is "0000."
- or -
8 View the software RAM Checksum. This attribute
00 SELECT = 8
is not editable. The default checksum may change.
SUM
=xxxMwu[
- or -
9 View the RPSU Power Cycle Counter. This attribute
00 SELECT = 9
is not editable. The counter indicates the number of
COUNTER = XXXX
times power is removed from the system after
Program 00 was initialized via Program 90 or 91-9.
6.
Hold
00 SELECT =
Secure data in system programming.
(0,1,2,8
or 9)
DATA PROGRAMMED
(Only works for "1" and "2")
7.
Spkr (Speaker)
00 SELECT =
Prepare system for another selection (go back to
Step 5), or exit Program 00 (continue with Step 8).
January
1996
8-15