Toshiba Strata DK 280 Installation Manual page 697

Table 13-23
Mode 96 - Remote Called Station Messaging (Add/Change)
W
Action Display/Printout
1 Enter the Message Mode
>MODE MESG
At the XMODE prompt, type MESG, press Enter.
2
To Change or Add a New Called Station Message m 96
Set the terminal keyboard to the lowercase (CAPS LOCK off) and
type m96.
Note:
Type m (lowercase) anytime it is desired to start over
in this procedure.
3
Type xxx (XXX = destination station number or destination m96 xxx
station group number - 30 = all DKTs/EKTs, 31 - 34 per system,
Program 31).
4
Type PYYY (p = page command and YYY = originating m96 XXX p YYY
station number).
5
Type p nn(p = page command and
m96 XXX p YYY pun
00 = 2-digit message memory location: IO - 19 personal
messages and 60 - 99 = system messages).
6
To Add the New Message [M]
m96 XXX P YYY
P[~OCMI
Set the terminal keyboard to uppercase and type message
as required (alphanumeric, 32 characters max.). New message
displays as it is typed.
7
To Set the Message
m96 xxx P YYY PO~[MI
P
Set the terminal keyboard to lowercase and type pm0.
m0
Destination station: Msg (MESSAGE) LED flashes, "CALL YYYM"
71 Zero
is displayed on LCD.
Origination station: "SENT XXXM" is displayed on LCD.
8 To Exit the Message Mode
m0
At any time, type mop (lowercase). 9
>MODE
Legend:
[Ml] = the message entered.
13-34
January 1996