Toshiba Strata DK 280 Installation Manual page 450

Program 13 -
Defining the Message Center
SELECT = 1 T I PORT = Station Logical Port Number
Enter the station logical port number of the
station to be defined as the Message Center.
Port
Number '
c7110
Note:
1. For RS-232 (SMDI or Toshiba Proprietary) and/or In Band (DTMF) voice mail integration, enable
the RSTU (or equivalent) port connected to the lowest VM port; or if VM ports are in a Distributed
Hunt (OH) Group, enter the DH Group Directory Number [DN] as the message center in Program
13and *32.
General Notes:
l
For more information, see the instructions preceding the record sheets.
l
Any electronic or digital telephone may receive (and store) up to 3 message waiting indications
per [PDN] or [PhDN] owned by the telephone, from any other electronic or digital telephone. A
fourth message waiting indication may be set by the Message Center electronic or digital
telephone only.
l
The Message Center is allowed to perform "Message Waiting, II even if disallowed on all other
stations.
l
Initialized data = no port assigned.
l
The message center feature should be assigned to the customer's main answering position: a
station or the lowest port (in VM group) of the customer's voice mail device (see Program 31 for
VM group port assignment), whichever the customer specifies.
l
When using RS-232 (SMDI or Toshiba Proprietary) voice mail interface, all stations musf also be
assigned to the message center port in Program *32.
DKOlll
1 o-34
January 1996